JiangXi JiangLing Gear Co.,Ltd

Chinese

2009-1-8

[ Links ]

·Investment & Cooperation

1.The maintenance of transmission accords with that of the requirements of your automobile. It usually consists of three grades technical maintenance.
2.Check and replace or make up the lubrication oil of the transmission termly.

Trouble	Possible reason	Solution
Abnormal noise	Bearing damaged	Replace the bearing
	Tooth surface knocked，burr or point corrosion on tooth surface or not in tangency	Repair or replace gear
	Improper axial position and clearance of gears	Check and adjust
	Insufficient oil results in insufficient lubrication.	Fill in enough lubrication oil
	Impurity in assembly	Check and clean away
Oil leaking	Oil seal worn out or damaged	Replace
	Seal glue not smear evenly or seal pad damaged	Replace seal pad and smear the glue evenly
	Junction surface is not in flatness	Check and adjust
Difficult in shifting the speed	Clutch not adjusted properly，separated halfway	Adjust
	Shifting system adjusted improperly or holdback on moving	Check and adjust
	Block ring invalidation	Replace
Return to neutral Position while automobile in motion	Synchronizer sleeve or cone surface of gear clutch-ring worn out.	Replace parts
Return to neutral Position while automobile in motion	Shifting system adjusted improperly	Check and adjust
No speed shift	Shifting system released	Check and repair
No speed shift	Shift lever released	Repair
Bearing damaged abnormally	Metallic impurity in lubricating oil	Replace
	Lubrication not sufficient or oil quality not fit to use	Replace
	Bearing not qualified	Replace